Orthopedic Implants in Massachusetts

Five Star Manufacturing, Inc. is an ISO 13485-certified, FDA-registered precision medical device manufacturer and surgical instrument repair specialist based in New Bedford, Massachusetts. The company operates two primary service lines: Five Star Manufacturing handles design and production of general hand-held surgical instruments, orthopedic instruments, implantable devices, and custom medical components from prototype through full-scale production. Five Star Surgical provides complete instrument lifecycle management, including factory-trained repair and restoration of surgical instruments to original manufacturer specifications. The company serves a dual customer base of original equipment manufacturers (including Zimmer Biomet, Arthrex, Smith + Nephew, DePuy Synthes, BD, and Integra) and healthcare systems (Northern Light Health, UMass Memorial, Boston Medical Center, Cambridge Health Alliance, Southcoast Hospitals Group). Manufacturing capabilities include precision machining, assembly, and quality control for instruments used in general surgery, orthopedic, and specialty procedures. Repair services encompass ultrasonic cleaning, instrument resharpening, functional testing, and restoration to meet or exceed industry standards. Five Star holds ISO 13485 medical device quality management certification, FDA device registration, and ITAR compliance (effective 2026). The organization emphasizes meticulous craftsmanship, attention to detail, and commitment to quality throughout manufacturing and repair processes. No specific product models or regulatory 510(k) clearances are detailed on the public website.

Brownmed is a family-owned medical device manufacturer founded in 1965, specializing in orthopedic and wellness products for pain relief, recovery, and enhanced patient quality of life. Operating from an 81,000 sq ft facility in Spirit Lake, Iowa, the company produces over 130 innovative medical devices across multiple categories including upper extremity support, cast and bandage protection, arthritis and pain relief solutions, and lower extremity care. Key product lines include Plastalume® Finger Splints, SEAL-TIGHT® Cast and Bandage Protectors, IMAK Compression Arthritis Gloves, and vibration/heat therapy systems. Brownmed serves healthcare providers and retail partners globally, holding numerous patents and recognized for innovation in orthopedic soft goods and wellness recovery solutions.

Boston Orthotics & Prosthetics (Boston O&P) is a pediatric-focused provider of custom orthotics and prosthetics with over 50 years of clinical experience. The company is the world's leading manufacturer of the Boston Brace, the most widely prescribed non-surgical scoliosis treatment system. Core product lines include scoliosis and spine orthoses (particularly the Boston Brace for adolescent idiopathic scoliosis), plagiocephaly treatment bands (cranial orthoses for positional head deformities in infants), dynamic movement orthoses for neuromuscular conditions, lower limb orthoses, and custom prosthetic devices. Boston O&P operates a network of clinical centers located within top-rated children's hospitals nationwide, staffed by certified orthotists and prosthetists. The company also maintains a Certified Partner Program that trains and credentials external providers to fit and dispense Boston O&P products, ensuring standardized clinical outcomes. Educational services include continuing professional education, online eLearning modules, and clinical support. Boston O&P was acquired by OrthoPediatrics Corp in 2024, expanding its market reach within the pediatric orthopedic device sector. The company serves pediatric and adult patient populations with evidence-based, non-surgical treatment solutions for scoliosis, developmental conditions, and mobility disorders.

Tegra Medical is a global contract manufacturer specializing in end-to-end production of medical devices. Headquartered in Franklin, Massachusetts, with manufacturing facilities across the United States, Costa Rica, Switzerland, and Asia, the company employs over 1,000 people. Tegra Medical delivers comprehensive manufacturing solutions including design, prototyping, precision production, assembly, packaging, and sterilization for complex metal and plastic components. The company serves multiple therapeutic areas including oncology, orthopedics, cardiology, minimally invasive surgery, ophthalmic, women's health, drug delivery, and robotic-assisted surgery applications. Advanced manufacturing capabilities include Swiss machining, multi-axis milling, injection molding, wire grinding, and precision finishing. Tegra Medical maintains ISO 13485 certification and FDA registration, supported by rigorous quality management systems. The company also operates Quick Wire & Tubing, an e-commerce platform offering in-stock and custom wire, tubing, and secondary processing services for medical device development and prototyping.

Medical Component Specialists, Inc. (MCS) is a certified Veteran-Owned Business and ISO 13485/FDA-registered contract manufacturer specializing in precision medical components for OEM suppliers. Founded in 2002 and based in Bellingham, Massachusetts, MCS operates three manufacturing facilities totaling 68,000+ square feet, including an 18,000-sq-ft nitrinol CNC machining facility and a 50,000-sq-ft input tube facility. The company manufactures high-precision components including cannulated drills, nitinol wires, orthopedic pins, mandrels, and specialty instruments for orthopedics, minimally invasive surgery, and interventional therapies. MCS combines over 60 years of family grinding craftsmanship with modern lean manufacturing, offering full in-line services including process design, rapid prototyping, precision production, and flexible finishing/assembly with lot traceability. The QuickShip Protolab enables rapid custom manufacturing.

Sterngold is a U.S.-based dental equipment and supplies manufacturer specializing in dental implant systems, prosthetics, attachments, and consumable dental materials. The company manufactures implants and precision components using validated CNC machinery in controlled, sterile environments. Primary product lines include the TRU® and PUR® dental implant systems (conical connection and tapered internal hex designs), MOR® small-diameter mini implants, and a comprehensive range of implant prosthetics including ERA, Stern SNAP, ORA, and Zest LOCATOR® abutments. The company also offers partial denture attachments (resilient and rigid designs), overdenture systems (implant abutments, stud and anchor attachments, bar attachments), segmented bridgework components, and restorative supplies including impression materials (SternVantage putty, monophase, light body), cements (TempoLok NE, Resiment), temporary crown and bridge materials, soft reline materials, and gingival reproduction products. Additional offerings include dental laboratory equipment (Model 2100 Blaster, micro pencils, model resin), aluminum oxides, waxes, alloys (ceramic, crown and bridge, solders), and digital CAD/CAM solutions for implants and intraoral scanning. The company provides the Sterngold Total Smile™ (STS™) integrated solution platform. Manufacturing capabilities include meticulous specification control, sterile packaging, and straightforward surgical protocols designed to simplify clinician and patient experience. The company serves dental professionals, laboratories, and practices requiring implant systems and comprehensive restorative dental supplies.

NanoHive Medical designs and manufactures bioactive 3D-printed titanium spinal fusion interbody devices. The company's proprietary Soft Titanium® technology features a patented rhombic dodecahedron lattice structure that reduces implant stiffness to levels comparable to PEEK while maintaining bone-like load-bearing strength. The lattice geometry mimics cancellous bone architecture and stimulates bone formation through optimal biomechanical properties. Product portfolio includes multiple interbody fusion cage designs: Hive Standalone ALIF (anterior lumbar interbody fusion), Hive ALIF, Hive Cervical, Hive Standalone Cervical Plated, Hive Standalone Cervical Zero Profile, Hive TL Curved (thoracolumbar), and Hive PL Straight (posterolateral). Clinical data demonstrates high fusion rates with no pseudoarthrosis reported in surgeon case series. The company holds US distribution partnerships and has secured Series C financing as of August 2024. Technology is protected by granted and pending patents. Devices are indicated for spinal fusion procedures across cervical, thoracolumbar, and lumbar regions. NanoHive serves spine surgeons and orthopedic surgical centers.

Life Instrument Corporation manufactures high-quality surgical instruments for orthopedic and neurosurgical applications. The company specializes in spinal surgery instruments, orthopedic instruments, and neurosurgical instruments, with a particular focus on retraction systems and micro-surgical tools. Key product lines include radiolucent retractor systems—notably the Radiolucent Zelpi Retractor Set and Carbon Fiber Peek McCulloch Retractor System—designed for lumbar spine procedures and other complex surgical applications. The Micro Surgical Instrument Set for micro discectomy procedures includes curettes, dissectors, probes, nerve retractors, rongeurs, suction tubes, and bipolar forceps in compact, organized trays. Life Instruments serves orthopedic surgeons and neurosurgeons with both catalog instruments and custom engineering and design services. The company offers instrument modification and custom design capabilities to meet specific surgical requirements. Product materials emphasize radiolucency and compatibility with intraoperative imaging, along with lightweight and powerful construction for demanding surgical applications.

Tecomet, Inc. is a global precision contract manufacturer founded in 1963 and headquartered in Woburn, Massachusetts, serving the medical device, orthopedic, and minimally invasive surgical markets. With 2,000+ employees across 14 manufacturing campuses in five countries, Tecomet generates approximately $678.9 million in annual revenue. The company is recognized as the world's largest orthopedic contract manufacturer, delivering end-to-end manufacturing solutions from design prototyping through full-scale production. Tecomet specializes in complex, high-precision products utilizing proprietary technologies including photochemical etching, precision machining, additive manufacturing, net shape forging, casting, laser and electron beam welding, and robotic finishing. Core offerings include orthopedic implants (hip, knee, shoulder, spine, trauma & extremities), precision surgical instruments, minimally invasive surgical components, and specialized cases and trays. The company provides comprehensive services encompassing innovation and design consulting, rapid prototyping, packaging and sterile cleanroom assembly, and full production support. Its collaborative approach and rigorous quality standards make it a preferred partner for leading medical device OEMs seeking scalable, innovative manufacturing solutions for orthopedic and surgical device products.

BONESUPPORT AB is a Scandinavian orthobiologics company specializing in the development and commercialization of injectable bone regeneration products. The company's primary product line is CERAMENT®, an innovative range of radiopaque, osteoconductive, drug-eluting bioceramic materials designed for bone defect healing and regeneration. CERAMENT products are formulated as injectable bioceramics that remodel to host bone over a six- to twelve-month period, providing a resorptive scaffold for natural bone healing. The company's product portfolio addresses clinical indications including trauma-related bone defects, infection-related bone loss (chronic osteomyelitis), benign bone tumors, and bone voids resulting from surgical intervention. CERAMENT products combine osteoconductivity with drug-eluting capability, enabling antimicrobial or other therapeutic agent delivery. The company markets these products to orthopedic surgeons, trauma surgeons, and orthopedic hospitals across European and international markets. BONESUPPORT is a publicly listed company (BONESUPPORT HOLDING AB, publ), indicating regulatory compliance and transparency standards consistent with major healthcare market requirements. The company's regulatory positioning supports compliance with CE marking for European markets and pursuit of additional regulatory pathways.

LAB Medical Manufacturing is a contract manufacturer of precision medical instruments and surgical devices with over 26 years of operational history. Based in Billerica, Massachusetts, the company operates a 30,000-square-foot facility and maintains a sister operation (Bester Medical System) in Central Europe. ISO 13485:2016 certified and FDA registered, LAB Medical specializes in the design and manufacture of surgical instruments, orthopedic implants, spinal devices, sports medicine applications, and dental instruments. The company offers comprehensive in-house capabilities including precision machining, tooling design, fixture creation, materials selection, and design-for-manufacturability (DFM) engineering. Product lines range from small precision instruments (bone screws, plates, shavers, suture passers, drills, taps) to complex surgical devices (fixation systems, drill guides, forceps, scissors, retractors, and punches). LAB Medical provides custom prototyping, full-scale manufacturing, and value-added services for OEM partners seeking optimized costs and robust design validation.

AliMed, LLC is a medical supplies manufacturer and distributor based in Dedham, Massachusetts, with over 50 years of industry experience since 1970. The company specializes in innovative healthcare products including durable medical equipment, rehabilitation aids, operating room accessories, and ergonomic solutions. AliMed's core product portfolio encompasses patient positioning systems (AliBlue™ Gel and AliBlue™ Lite hybrid gel-foam positioners), surgical positioning straps and supports, orthopedic footwear and insoles, wheelchair cushions, hand and wrist braces, lower extremity positioning aids, and therapy equipment. The company serves hospitals, ambulatory surgery centers, post-acute care facilities, and home care settings. AliMed is recognized for customization capabilities, responsive U.S.-based customer service, same-day shipping on in-stock orders, and volume pricing. The company was named Manufacturer of the Year by the Massachusetts Legislative Caucus.

Arthrosurface, Inc. designs and manufactures minimally invasive joint replacement implants and solutions for active patients seeking alternatives to traditional total joint replacement. The company specializes in joint preservation technology across multiple anatomical sites, including shoulder, wrist, knee, and foot/ankle joints. Their product portfolio focuses on reducing pain, improving range of motion, and accelerating recovery time compared to conventional surgical approaches. Arthrosurface maintains a network of trained surgeons across the United States and provides clinical evidence supporting the efficacy of their implant systems for patients who wish to maintain or return to an active lifestyle. The company positions its solutions as clinically proven alternatives for patients who may otherwise face limitations in physical activity following traditional total joint replacement or fusion procedures.

OSSIO Inc. manufactures OSSIO fiber®, a proprietary bio-integrative orthopedic implant material engineered from natural minerals identical to bone composition. Unlike permanent metal hardware, OSSIO fiber® implants integrate fully into native bone over 18–24 months and are naturally resorbed, leaving only healthy bone behind. The material provides strength comparable to cortical bone while promoting predictable bio-integration and eliminating long-term complications associated with permanent implants, including allergic reactions, stress shielding, and the need for revision surgery. OSSIO fiber® is indicated for foot and ankle orthopedic procedures, including hammertoe correction and other fixation applications. The company operates research, manufacturing, and quality assurance facilities in Caesarea, Israel, and maintains commercial headquarters in Woburn, Massachusetts. Clinical data demonstrates 100% patient satisfaction in hammertoe studies with high functional outcomes. OSSIO fiber® implants meet FDA regulatory standards for orthopedic devices and are positioned as a transformative alternative to conventional titanium and stainless steel hardware in podiatric and orthopedic surgery.

Intrinsic Therapeutics Inc. manufactures Barricaid, a bone-anchored implant device designed to reduce the incidence of reherniation and reoperation in patients with large annular defects following lumbar discectomy. The Barricaid implant is FDA-approved and represents the first device clinically proven to prevent recurrent disc herniation in high-risk patients. The company has spent over two decades developing this solution in collaboration with world-renowned surgeons, scientists, and clinical investigators. Barricaid is indicated for patients undergoing lumbar discectomy who have large annular defects and elevated reherniation risk. The device is positioned to optimize surgical outcomes and reduce associated pain and disability from recurrent lumbar disc herniation. The company markets Barricaid to both physicians and patients, emphasizing clinical evidence demonstrating significantly reduced disc reherniations and reoperation rates compared to standard discectomy alone.

OrthoFundamentals, LLC (now operating as Demetra Spine following acquisition by Demetra) designs and manufactures single-use surgical kits and 3D-printed implants for orthopedic and spinal surgery, with specific focus on SI (sacroiliac) joint fusion procedures in the outpatient surgery center market. The company's core platform combines pre-sterilized, single-use instrument trays with sterile-packed 3D-printed implants and RFID-enabled inventory management and automatic billing systems. Products are designed to eliminate contamination risk, instrument delays, and case cancellations caused by damaged packaging or missing instruments—key pain points in ambulatory surgery centers (ASCs). The Trellis SI Joint Fusion System represents the company's flagship offering. OrthoFundamentals targets orthopedic surgeons and ASC operators seeking cost-efficient, high-quality alternatives to traditional hospital-based care models. The company emphasizes value-based solutions and accessibility for outpatient settings, positioning itself against the complexity and cost of legacy MedTech commercial models. Manufacturing capabilities include 3D printing of implants and assembly of sterile procedural kits. The company holds regulatory clearance sufficient to market spinal fusion implants and surgical instruments in the US market, though specific 510(k) or FDA clearance details are not specified on the website.

Anika Therapeutics is a global leader in hyaluronic acid (HA)-based orthopedic regenerative solutions and osteoarthritis pain management. Founded with 30+ years of HA expertise, the company develops and markets innovative treatments addressing rotator cuff and tendon repair, cartilage regeneration, bone augmentation, and non-opioid osteoarthritis pain management. The company operates through two primary product platforms: Regenerative Solutions (tissue repair and scaffold-based regeneration) and OA Pain Management (HA viscosupplements and combination therapies). Key products include Integrity (HA-based rotator cuff and tendon repair augmentation), Hyalofast (cartilage regeneration scaffold), Tactoset (injectable bone substitute), NanoFx (bone marrow stimulation), Cingal (combination HA + steroid injection), Monovisc (single-injection HA viscosupplement), and Orthovisc (multi-injection HA viscosupplement). Products are clinically validated with robust safety and efficacy data supporting use in orthopedic surgery and rheumatology. Anika maintains US headquarters in Bedford, MA, with operational offices in Warsaw, IN, and significant EU presence in Padova, Italy. The company distributes products in 45+ countries globally through direct sales, distribution partnerships, and strategic alliances including J&J MedTech for US Orthovisc and Monovisc distribution. Regulatory credentials and certifications align with FDA, CE marking, and ISO standards for medical devices. The company serves orthopedic surgeons, rheumatologists, pain management specialists, and healthcare institutions seeking regenerative and conservative OA treatment alternatives.

SDS Swiss Dental Solutions USA, Inc. is a leading manufacturer of ceramic dental implants made from biocompatible zirconium dioxide. The company specializes in white ceramic implant systems as an alternative to traditional titanium implants, addressing biocompatibility concerns and offering superior aesthetic properties. Primary product line is the BRIGHT implant series, engineered for immediate implantation with high biocompatibility, durability, and clinical performance. The company was founded in 2007 in Switzerland and established its US subsidiary in 2018, with market entry to the USA in 2020. SDS operates a comprehensive business model encompassing implant manufacturing, professional education and training through SDS Education and the Swiss Biohealth Academy, scientific research and publication, and nutritional supplementation products developed to support treatment outcomes. The company maintains a Swiss Biohealth Clinic and operates a global network of high-volume implant practitioners (500+ and 400+ implants annually). SDS holds CE certification for ceramic implants (since 2004) and has developed proprietary surgical techniques including Sonic Weld membrane welding for guided bone regeneration (GBR) and the SCC Short Cut Concept. Target markets include dental implantologists, prosthodontists, and general dentists seeking biocompatible implant alternatives. The company emphasizes clinical education, scientific evidence, and practitioner support as core service differentiators.

Jarvis Surgical, Inc. is a fifth-generation, privately held orthopedic manufacturing company with roots tracing to 1901 and formal incorporation in 1993. The company specializes in precision components and finished orthopedic devices for the surgical market. Product portfolio encompasses foot/ankle, knee, hip, spine, and shoulder implants and instruments. The company emphasizes lean manufacturing processes, customer service, and engineering capabilities. Based in Westfield, Massachusetts, Jarvis Surgical operates as a contract manufacturer and supplier to orthopedic device companies and surgical facilities. The company maintains FDA compliance and quality standards appropriate to implantable medical device manufacturing, though specific regulatory certifications (510(k), ISO 13485) are not detailed on the website. Manufacturing and design capabilities support custom and standard orthopedic implant solutions across multiple anatomical sites.

Viant Medical is a vertically integrated contract manufacturing partner specializing in medical device design, development, and full-scale production. The company operates 25 global locations with 2.3 million square feet of factory space, including 299,000+ square feet of ISO-certified clean room capacity. Viant serves OEMs across multiple clinical markets: orthopedics (instruments, implants, delivery systems, UHMWPE components), surgical technologies (minimally invasive surgery, robotics, endoscopy, ophthalmology, wound care, biopsy, aesthetic surgery), cardiac and interventional devices (overmolding, nitinol tubing, hypotube precision components), drug delivery (auto-injectors, IV sets, connectors, respiratory devices), bioprocessing (containment, transfer, filtration systems), bioelectronics (pain management, sleep apnea, wearables), diagnostics and laboratory products (injection tubes, chromatography tubing), and respiratory/monitoring/patient care (masks, trach tubes, airway tubes, console components). Core manufacturing capabilities include precision metals and metal tubing, medical-grade plastics and silicone molding, extrusions, tooling, automation, device assembly, and finished device services. The company provides end-to-end solutions from prototyping through sterilization and packaging management. Viant emphasizes vertical integration to ensure quality control, reduce supply chain risk, and accelerate time-to-market. The ViaLaunch™ program offers program management support. The company focuses exclusively on medical device manufacturing and maintains operational expertise in complex assembly, overmolding, and materials science.

Boylston Surgical LLC, founded in 2024, develops orthobiologic products for soft tissue repair and regenerative medicine. The company's flagship product, BioTend, is a woven poly-L-lactic acid mesh designed for tendon and ligament surgical repairs. BioTend has FDA clearance for use in major tendon and ligament repair procedures. The product's woven design mimics the mechanical properties of human tendons and ligaments, providing stronger, more functional repairs. The poly-L-lactic acid fibers safely absorb into the body over 9–12 months, eliminating the need for removal surgery. After over 3,000 surgical procedures, BioTend has demonstrated no adverse safety events or patient complications. The company builds on 10 years of foundational research and development conducted by Synthasome, its predecessor organization. Boylston Surgical's mission focuses on advancing regenerative medicine through high-quality scientific and engineering research to repair, regenerate, or replace damaged soft tissues including tendons, ligaments, and articular cartilage. The company serves orthopedic surgeons and surgical centers performing soft tissue repair procedures.

Miach Orthopaedics is a medical device company specializing in bio-engineered solutions for anterior cruciate ligament (ACL) injury treatment. Founded in 2016 by Dr. Martha Murray at Boston Children's Hospital, the company developed the BEAR® (Bridge-Enhanced ACL Restoration) Implant, which represents a paradigm shift from traditional ACL reconstruction to natural tissue restoration. The BEAR Implant received FDA De Novo approval in 2020—the first such approval in sports medicine—and is now shown to reduce the risk of post-traumatic osteoarthritis. The implant works by creating a protective environment that enables the body to regenerate its own ACL tissue by forming a blood clot between torn ACL ends. Miach Orthopaedics actively supports healthcare professionals with clinical evidence, surgical training, rehabilitation protocols, and patient education resources. The company conducts ongoing clinical studies including the BEAR Implant Registry Study and BEAR MOON Study to track long-term outcomes and supports a network of surgeons and physical therapists across the United States.

Micron Solutions Inc. is a publicly traded contract manufacturing organization headquartered in Fitchburg, Massachusetts, specializing in precision-engineered components for the medical device, defense, and life sciences markets. Founded in 1978 and evolved from Arrhythmia Research Technology, Inc., the company operates a 120,000 square-foot ISO 13485-certified manufacturing facility offering integrated services including precision machining, thermoplastic injection molding, mold making, and production of silver-plated medical sensors for disposable electrodes. The company provides value-added finishing services such as pad printing, ultrasonic welding, stamping, and laser marking. Micron Solutions serves orthopedic implant manufacturers, diagnostic test kit producers, drug delivery device makers, and life sciences companies, positioning itself as a comprehensive manufacturing partner capable of handling projects from concept through production while maintaining FDA registration and quality standards.

TERRAN LLC is an orthopaedic medical device manufacturer specializing in implants, surgical instruments, and sterilization cases. The company operates a worldwide network of manufacturing facilities focused on orthopaedic solutions. Product lines include arthroscopy instruments, trauma instruments, maxillofacial devices, neurosurgical instruments (Kerrison rongeurs, lamina spreaders, flexible osteotome sets, mallets), screw drivers and bits, drill bits, fixation pins, taps, and sterilization cases. TERRAN serves orthopaedic surgeons, trauma centers, and surgical facilities with a full line of devices designed to streamline procurement and support customer growth. The company positions itself as a single-source provider to reduce sourcing complexity for hospital and surgical center buyers.

Trax Surgical manufactures innovative medical instrumentation and implant devices for orthopedic surgical procedures involving the upper and lower extremities. The company specializes in bone compression tools and fixation systems, including headed and headless compression screws, snap-away bone screws, bone compression staple systems, and suture anchor devices. All products are manufactured in an FDA-registered, ISO 13485:2016-certified facility in Stoughton, Massachusetts. Trax Surgical's offerings include the REDIFIX system for soft tissue reattachment, instrumentation kits with color-coded sizing (small, medium, large), and the LINKT™ Compression Staple System featuring nitinol memory-shape staples. These precision instruments are designed for osteotomy, fixation, fusion, and fracture repair procedures, providing clinicians with durable, patient-focused solutions for orthopedic trauma and small bone repair.

ZSFab is a spine surgery implant manufacturer specializing in personalized orthopedic implants designed for reliable bone integration and reduced stress shielding. The company employs additive manufacturing and digitally structured materials technology to produce complex lattice designs that optimize porosity and mechanical properties for improved bone ingrowth. ZSFab's implants are engineered with clinical focus on supporting consistent performance across diverse surgical scenarios while maintaining image clarity for postoperative assessment. The company controls all stages of production—from structural design through additive manufacturing to post-processing—to ensure consistent implant quality and reliability for spine surgery applications.

TESco Associates, Inc. is a specialized contract manufacturer and research & development partner for bioabsorbable medical devices and implants. Founded in 1980 and headquartered in Tyngsborough, Massachusetts, the company operates a 15,000 sq. ft. cGMP-compliant facility with 12 Class 10,000 cleanroom suites. TESco provides comprehensive services across the medical device lifecycle: product development support, material selection and custom polymer formulation, mold design and fabrication, and manufacturing problem-solving from concept through clinical trials and commercial production. The company has developed proprietary polymer processing techniques for injection molding, extrusion, and specialty material blending, with expertise in low molecular weight loss and residual monomer control. TESco's portfolio includes bioabsorbable orthopedic implants, surgical screws, plates, clips, and interference devices. The firm serves as an outsourced partner for medical device companies requiring specialized expertise in bioabsorbable polymeric systems and has supported development of hundreds of bioabsorbable products.