Emergency & Resuscitation

Kentron Health Care, Inc. is a medical products distributor and supplier based in Springfield, Tennessee, offering a comprehensive portfolio of medical consumables, disposables, and equipment. The company's product range includes syringes, needles, IV sets, wound care supplies (dressings, gauze, bandages), gloves, personal protective equipment (PPE), surgical instruments, diagnostic equipment, respiratory care products, sterilization products, germicidal products, and specialized kits for EMS, OB/GYN, and medical applications. Kentron supplies burn care products, cold/hot therapy packs, diabetic care supplies, infusion products (including the Kenaflexx line), immobilization devices, laryngeal products, nursing supplies, and urology consumables. The company also distributes hospital plastics, textiles, sharps containers, surgical tapes, tools, and miscellaneous medical supplies. Kentron serves emergency medical services, hospitals, clinics, and healthcare facilities across the United States. The company maintains MSDS (Material Safety Data Sheet) documentation for chemical products and operates as a B2B supplier with a full-service catalog spanning multiple therapeutic areas and clinical departments. Their product distribution model emphasizes accessibility to healthcare providers through direct sales and a comprehensive ordering system.

Certa Dose (operated by CD Acquisitions, LLC) is a medical safety company focused on eliminating dosing errors, particularly in emergency and pediatric settings. The company develops innovative dosing solutions centered on visual verification and cognitive offloading to prevent medication administration errors. Their core mission addresses a critical patient safety gap: studies indicate that 70% of dosing errors occur during drug administration and are missed by electronic ordering systems, with pediatric patients facing 3x higher error risk than adults. The company's primary product offering is the Certa Dose app—a digital solution that enables healthcare providers to visualize the correct medication volume, select appropriate syringes, and document dosing procedures. The app supports weight-based dosing calculations for patients of varying ages and sizes, allowing clinicians to enter actual patient weight or estimate it using length or age parameters when exact measurements are unavailable. The platform employs color-coded confirmation systems and visual verification protocols to enhance accuracy and communication clarity among care teams. Physical product offerings include the PALS (Pediatric Advanced Life Support) Syringe Holder Kit, designed specifically for pediatric emergency codes, and an Epinephrine Convenience Kit for anaphylaxis management across the neonatal-to-adult dosing spectrum. The company also manufactures a pediatric measuring tape for weight estimation during emergencies. These products are positioned as essential tools for emergency departments, pediatric units, and critical care environments where dosing accuracy directly impacts patient survival.

Prabadin Corp is a Miami-based medical supplies distributor specializing in hospital equipment, surgical consumables, and pharmaceutical products. The company maintains an inventory of over 10,000 SKUs updated daily, with a focus on wound care, surgical packs, anesthesia agents, saline solutions, and emergency supplies. Product offerings include Jackson Pratt wound drainage kits, rigid suction canisters, isoflurane and epinephrine solutions, custom surgical packs for liposuction and breast procedures, and sodium chloride solutions. The company partners with major pharmaceutical and medical distributors including Cardinal Health, McKesson, Medline, and NDC, indicating compliance with standard healthcare supply chain requirements. Prabadin offers 24-hour delivery for orders placed before 2 PM and maintains B2B relationships with medical directors, surgeons, and hospital administrators. The company operates Monday–Friday, 9 AM–5 PM EST, with a physical location in Miami, FL. While specific regulatory certifications are not explicitly mentioned on the website, the presence of NDC-coded pharmaceutical products and partnerships with major healthcare distributors suggests alignment with FDA and standard pharmaceutical distribution requirements.

SSCOR, Inc. manufactures portable emergency suction devices for hospital and pre-hospital (EMS, fire, tactical) settings. Core product lines include battery-powered portable suction units, catheter accessories, and disposable suction tips. Hospital products include the SSCOR Duet (portable aspirator with optional mounting bracket), SDC Catheter, SALAD Technique (suction-assisted laryngoscopy and airway decontamination), and HI-D suction tips. EMS and field products include Quickdraw, S-SCORT III, and SSCOR VX-2 portable suction units, plus the onboard suction system for vehicles. The company also offers DCell suction technology and tactical suction solutions. SSCOR sells through a direct sales team and online shop. The company emphasizes airway management and aspiration prevention in acute care environments. Repair services, product manuals, technical support, and regulatory compliance documentation are available. The company is located in Simi Valley, California and maintains U.S. manufacturing capabilities.

SAM Medical Products is a manufacturer of first-aid, field treatment, and emergency medical supplies headquartered in Tualatin, Oregon. The company specializes in portable, field-deployable devices for trauma management, hemorrhage control, fracture stabilization, and respiratory/circulatory management in pre-hospital and austere environments. Core product lines include SAM SPLINT (bendable immobilization splints), SAM XT tourniquets (extremity hemorrhage control with TRUFORCE buckle technology), SAM Junctional Tourniquet (non-extremity hemorrhage control), SAM Chest Seals (for penetrating thoracic trauma), SAM ThoraSite (thoracostomy management), SAM IO (intraosseous access training/delivery), SAM Pelvic Sling II (pelvic fracture stabilization), EVAC-U-SPLINT (vacuum mattress systems), and FASPLINT (full-body immobilization). The company also manufactures CHITOSAM 100 (hemostatic dressing) and offers integrated product bundles for bleeding control, tactical, and recreation markets. Products are designed for intuitive use by both emergency medical personnel (EMTs, paramedics, military) and civilians. SAM XT is recommended by the U.S. Department of Defense Committee on Tactical Combat Casualty Care (CoTCCC). The company provides training resources, instructional videos, and field storage solutions alongside consumable and reusable equipment. Products target emergency medical services, law enforcement, military, outdoor recreation, and institutional healthcare markets.

Christie Medical Holdings, Inc. is a global medical technology company specializing in near-infrared (NIR) light-based vascular imaging systems. The company's flagship product, VeinViewer®, is a mobile vascular imaging device that enables real-time visualization of accessible vasculature on the skin surface in HD, facilitating vascular access procedures including peripheral intravenous catheter placement. The company has also developed CathCompass™, an integrated color-coded catheter sizing reference graphic exclusive to VeinViewer® Flex and Vision2 models, supporting clinical assessment across pre-, during, and post-procedure phases. Christie Medical operates globally across 40+ countries and is recognized as a MedTech Development Company of the Year. The company is dedicated to improving patient experience, lowering healthcare costs, minimizing patient risk, and developing quality products through continuous innovation and research.

Founded in 1989 in Hong Kong, Rondish Company Limited is a specialist medical device manufacturer focused on elderly care, disability support, and patient safety solutions. With over 36 years of industry experience and a presence in 30+ countries, Rondish designs and manufactures an integrated suite of healthcare security products including advanced fall prevention systems, anti-wandering solutions, nurse call systems, and bathroom safety alarms. The company operates from ISO 9001 and ISO 13485 certified facilities, with products compliant to CE, RoHS, FCC, and FDA standards. Rondish serves 500+ healthcare institutions globally, including 60% of hospitals in Hong Kong. The firm offers both standardized product lines and custom engineering solutions, with a focus on wireless/IP-based technologies and seamless system integration for long-term care facilities, hospitals, and home-based care environments.

Zoe Medical, Inc. is a US-based manufacturer of patient monitoring systems founded in 1996 and headquartered 30 miles north of Boston in Topsfield, Massachusetts. The company has established itself as one of the largest patient monitoring system manufacturers in the United States, with tens of thousands of installed units globally. Zoe designs, manufactures, and supports all products domestically in the USA. Historically, Zoe has operated primarily as an OEM/contract manufacturer for major healthcare organizations. The company now distributes its own-label monitoring products at factory-direct pricing, targeting physician offices, oral and outpatient surgery centers, emergency medical services (EMS), and central monitoring stations. Product portfolio includes the Nightingale series (PPM3 for oral/outpatient surgery, PHM compact spot-check monitor with thumb ECG for physician offices, and MPC nurse central station for alarm surveillance and trending) and the 740SELECT multiparameter monitor for EMS and vital signs applications. All monitors support standard vital sign parameters including ECG, blood pressure, pulse oximetry, temperature, and capnography. The company emphasizes substantial R&D investment, proprietary product architecture, and manufacturing capability. Products are designed for clinical environments ranging from point-of-care physician offices to operating rooms, EMS transport, and hospital central monitoring. Zoe maintains direct customer support and offers sales quotes and customized solutions. All manufacturing and technical support are US-based.

C.R. Bard (now part of BD) is a diversified global medical technology company operating through multiple business segments: BD Interventional, BD Life Sciences, and BD Medical. The company manufactures and distributes an extensive portfolio of medical devices, consumables, and diagnostic solutions across vascular access, medication delivery, infection prevention, laboratory diagnostics, surgical instruments, and specialty medical equipment. Through the Medivance acquisition (2011), Bard offers the Arctic Sun™ Targeted Temperature Management system for precise patient temperature control in critical care settings. The company serves hospitals, healthcare systems, clinical laboratories, and other healthcare facilities with products spanning syringes and needles, catheters (central and peripheral), infusion systems, surgical mesh and grafts, diagnostic culture media, molecular testing systems, blood collection products, stents, and specialty equipment for urology, cardiology, gynecology, and interventional medicine. With thousands of SKUs across therapeutic areas including vascular surgery, gastrointestinal care, wound management, and microbiology solutions, Bard functions as a comprehensive B2B medical device and consumables supplier.

Bearpac Medical manufactures the Passio™ Pump Drainage System, a digital handheld drainage device designed for patients with malignant pleural effusions (MPE). The Passio system represents a novel approach to pleural fluid management, enabling patients to manage their therapy with greater autonomy and comfort in outpatient or home settings. The company offers the Passio Pump as a complete system including a handheld control unit and a proprietary Pleural Catheter Insertion Kit. The device addresses a significant clinical need in oncology and pulmonology by providing convenient, controlled drainage for patients with fluid accumulation in the pleural space—a common complication in advanced malignancy. Bearpac positions the Passio as the first digital handheld system in this category, emphasizing patient comfort, control, and convenience. The company serves hospitals, outpatient facilities, and home care settings treating oncology patients with pleural complications. Product documentation and patient support materials are available in both English and Spanish, indicating attention to diverse patient populations.

Arjo is a global medical technology company headquartered in Malmö, Sweden, founded in 1957. With approximately 6,500 employees and presence in over 100 countries, Arjo specializes in patient handling, mobility, hygiene, and pressure injury prevention solutions. The company's core product portfolio includes safe patient handling equipment (including the Maxi Move® 5 floor lifter system and SARA technology), comprehensive medical bed ranges, hygiene solutions (including the innovative Symbliss® bathing system), pressure injury prevention surfaces and clinical seating, disinfection systems, and venous thromboembolism (VTE) prevention equipment with pumps and compression garments. Arjo serves hospitals, health systems, acute care facilities, and long-term care settings. The company emphasizes evidence-based care through its Arjo MOVE programs and Positiva Åttan philosophy, which promote mobility outcomes, staff safety, operational efficiency, and patient dignity. Arjo also offers reprocessing solutions (ReNu technology) and equipment rental options to support healthcare sustainability and cost management.

Delta Development Team Inc manufactures specialized transportable blood storage and cold-chain logistics solutions for prehospital, military, first responder, and emergency medical settings. The company is a pioneering supplier of thermal management systems and real-time temperature monitoring platforms designed to maintain blood product viability in austere field conditions. Core products include the Autonomous Portable Refrigeration Unit (APRU) series—battery-powered, rugged refrigerators maintaining 1°C–6°C for extended periods (up to 95 hours on a single charge)—and complementary Smart Blood Coolers with Bluetooth and cellular remote monitoring. The company also offers BloodComm, a cloud-based blood program management system providing real-time temperature tracking, alerts, and cold-chain attestation for regulatory compliance. Additional products in development include larger-capacity transportable blood systems (TBS), blood warming devices (SUBW), and temperature conditioning monitors (TempWatch). Delta Development is FDA-listed, AABB-approved, and holds comprehensive regulatory certifications. The company serves fire departments, EMS agencies, hospitals, military units, and blood banks across the United States, with documented deployments in helicopter EMS and ground-based prehospital programs. Key customers include Austin-Travis County EMS (699+ units transfused as of early 2025), Lehigh Valley Health Network, Northeast Georgia Health System, and multiple regional EMS and fire departments. The company emphasizes rigorous testing, validation, and responsive customer support for life-critical applications.

Resuscitation Innovations LLC (operating as AdvancedCPR Solutions) discovers, develops, and implements novel CPR treatment strategies to increase neurologically favorable outcomes after cardiac arrest. The company manufactures the EleGARD™ Patient Positioning System, a device-assisted head-up position CPR platform designed for use by emergency responders, fire rescue, and hospital personnel. Animal studies demonstrate a 6-fold increase in neurologically sound survival with the EleGARD™ approach compared to conventional flat CPR. Human observational data show strong associations with improved survival outcomes. Target customers include emergency medical services, fire departments, hospitals, and airport emergency response teams. Products are marketed for both prehospital and in-hospital cardiac arrest management, supporting BLS and ACLS protocols with neuroprotective CPR strategies.

QinFlow Inc. manufactures portable blood and IV fluid warming systems for emergency care, surgery, ICU, and military applications. The company's core product line comprises the Warrior, Warrior Lite, and Warrior EXTREME modular blood warmers, designed for rapid thermal management of blood, plasma, and other fluids across the continuum of care. Products feature dry warming technology, aluminum-free fluid paths, portable designs, high flow rates (up to 250 ml/min), and battery-powered operation suitable for prehospital, in-hospital emergency, operating room, and intensive care environments. The Warrior and Warrior Lite systems are positioned as gold-standard solutions offering superb performance at affordable per-use pricing. QinFlow also offers Compact Disposable Units (CDU) for single-use applications. The company serves trauma centers, air medical programs, fire/EMS agencies, military medical units, and major academic medical centers including Mayo Clinic, Johns Hopkins, Memorial Hermann, Duke Health, and Children's Hospital. Thermal management of transfused blood and IV fluids is critical for trauma patient survival outcomes, particularly in hemorrhage control and resuscitation protocols. QinFlow emphasizes ease of use, durability, patient safety, and comprehensive customer support across North American and international markets.

Rocket Medical is a UK-based manufacturer of single-use medical devices with over 60 years of operational history. Founded in 1964 and incorporated as Rocket Medical PLC in 1996, the company specializes in innovative drainage solutions, women's health products, gastrointestinal care, and diagnostics. Key product lines include the Rocket IPC home drainage portfolio for managing pleural effusions and malignant ascites, chest drain bottles with underwater seal technology, catheters for reproductive medicine and hysterosalpingography (HSG), biopsy needles, and specialized endoscopic tools. The company operates globally, serving healthcare professionals in over 50 countries with a network of 100+ partners. ISO 13485 certified and fully compliant with CE, TGA, Canadian, and US FDA regulations, Rocket Medical combines rigorous quality assurance with patient-centered innovation. The organization employs approximately 106-110 personnel and continues to collaborate with leading clinicians to advance clinical outcomes.

HC Biologics is a global biotechnology company headquartered in Miami, Florida, specializing in the development, manufacturing, and distribution of advanced biologics, spinal implants, orthopedic solutions, arthroscopy systems, trauma products, and cardiothoracic devices. Operating in nearly 50 countries with regional offices in Mexico, Colombia, UAE, Chile, Türkiye, Peru, Panama, South Korea, and the Netherlands, the company delivers innovative surgical solutions to healthcare professionals worldwide. HC Biologics is known for custom orthopedic implants and instruments produced using 3D printing technology and holds ISO 13485, ISO 9001, CE certification, and FDA tissue establishment registration. The company focuses on safety, efficacy, and clinical reliability, with 78% of sales derived from international exports and 44% year-over-year growth.

The Harloff Company manufactures and designs a comprehensive range of medical storage carts and cabinets for acute care, medication distribution, endoscopy, and specialty applications. Founded in 1951 and operating since 1987 in medical equipment, Harloff designs, engineers, and manufactures all products in-house at its Colorado Springs, Colorado facility, ensuring American-made quality and control. Product lines include acute care carts (crash carts, anesthesia carts, isolation carts, procedure carts), medication carts (punch card, unit-dose, Med-Bin, Dispill®, Medicine-On-Time®), endoscope drying and storage cabinets with SureDry technology and smart scope tracking systems, MedStor Max medical storage units, specialty carts (MRI-safe, cast, pediatric, malignant hyperthermia, narcotics, intraocular lens), and scope transport systems. The company offers customizable cart configurations through its online builder tool and emphasizes full-assembled shipping and quick-ship options (5 business days). Harloff provides a 12-year warranty on carts and serves hospitals, ambulatory surgery centers, and healthcare facilities. The company leverages modular tray systems (H+H and Pegasus compatible), antimicrobial tops, multiple locking options, and ergonomic design. Technical capabilities include custom engineering for device manufacturers, CAD design services, and broad compatibility with standard medication packaging systems. No specific FDA 510(k) or ISO certifications mentioned on site, though products are marketed for clinical use.

Becton, Dickinson and Company (BD) is a global medical technology leader founded in 1897 with approximately $20.2 billion in FY2024 revenue. BD supplies a comprehensive portfolio spanning diagnostic and laboratory solutions, surgical products and instruments, medication management systems, and infection prevention technologies. The company pioneered disposable syringes (Plastipak™) and blood collection systems (BD Vacutainer®), and operates automated blood culture and diagnostic platforms. Through strategic acquisitions including CareFusion and C.R. Bard, BD expanded capabilities in medication management, surgical interventions, and hospital systems. Current offerings address ambulatory surgery centers, diagnostic accuracy and specimen collection workflows, patient safety and infection control, advanced clinical analytics through BD HealthSight Advisor, medication management optimization, and surgical efficiency. BD Incada™ Connected Care Platform represents the company's digital health integration strategy. With global operations across alternate sites, diagnostic labs, research areas, hospital units, pharmacy, and surgical suites, BD serves healthcare systems seeking integrated solutions to improve patient outcomes and operational efficiency.

Taylor Healthcare Products, Inc. is an industry-leading manufacturer of high-quality, cost-effective disposable and reusable linens and medical transport equipment for healthcare and EMS professionals. The company specializes in disposable stretcher sheets, fitted sheets, fleece blankets, soft stretchers, pillows, and related patient transfer products designed to serve facilities and first responders. Taylor's proprietary Color Coded Lift Capacity™ system enables easy selection of products suited to specific patient transfer needs, with capacity ranges from standard to bariatric (up to 500 lbs). Product lines include the G-Force™ Series, SureFit™ Series, Vanguard Series, Titan™ Series (soft stretchers), Polar Fleece™ blankets, TaylorAir™ (helicopter cot sheets), and Taylor Components emergency medical supplies. The company also offers Taylor MedKits for first responders, NurseED kits for nursing and EMS students, and specialty products for the spa industry. Committed to excellence in quality, reliability, and customer service, Taylor Healthcare serves hospital systems, ambulance services, emergency departments, and EMS providers nationally.

Ohio Medical is a B2B supplier of medical gas delivery systems, suction equipment, and related components for hospitals, ambulatory surgery centers, and clinical laboratories. The company manufactures and distributes suction regulators, oxygen concentrators, flowmeters, gas regulators, blenders, demand valves, and portable suction devices. Ohio Medical also supplies medical gas pipeline infrastructure including manifolds, zone valve boxes, outlets, alarms, and adapters. Additionally, the company operates the Squire-Cogswell Industrial Division, providing vacuum pumps (rotary vane, liquid ring, rotary claw) and air compressors (oil-less rotary scroll, reciprocating piston) for medical and laboratory clean air applications. Ohio Medical offers preventative maintenance programs, calibration services, and repair services (including the Diamond Repair Service for suction regulators) to support hospital and clinical operations.

Founded in 1978, Skil-Care Corporation is a women-owned small business (WBENC-certified) specializing in the design and manufacturing of safety, comfort, and mobility healthcare products for nursing homes, hospitals, rehabilitation facilities, and homecare settings. The company's comprehensive product portfolio addresses fall prevention, wound management, pressure relief, patient positioning, and mobility assistance. Key offerings include positioning wedges, heel/elbow protectors, gait belts, mattresses, cushions, wheelchair accessories, bariatric products, incontinence supplies, bed rail pads, safety alarm systems (including the proprietary SignalSafe Fall Monitor), and recreation/exercise equipment. Skil-Care serves clinicians, facility administrators, and families with evidence-based products designed to enhance patient safety and comfort while reducing caregiver burden in clinical and home settings.

Palarum is a healthcare technology company specializing in wearable IoT solutions for patient safety, fall prevention, and mobility monitoring in acute and post-acute care settings. The company develops smart textile-based devices, most notably the PUP SmartSocks™, which utilize eTextile and IoT technologies to deliver real-time alerts when fall-risk patients attempt to ambulate unassisted. Clinical trials demonstrate a 73% reduction in patient falls and 40% reduction in false alarms compared to CMS baseline metrics. Beyond fall prevention, Palarum offers mobility tracking, eRounding capabilities, and data analytics platforms designed for hospitals, rehabilitation facilities, and long-term care environments. The company also markets the SmartBadge, an emergency preparedness and staff safety solution for educational institutions. Products are developed with clinical input and have earned Nurse Approved Certification, positioning Palarum as a clinically validated player in the patient safety technology space.

Global Medical Foam, Inc. is a US-based manufacturer of pressure management, positioning, and patient safety products for acute care hospitals, long-term care facilities, home care, hospice, and rehabilitation environments. The company specializes in proprietary Conforming Comfort® foam-based positioning devices designed to reduce pressure injury risk, promote even tissue load distribution, and prevent patient migration or bottoming-out. Products developed in accordance with AHRQ (Agency for Healthcare Research and Quality) guidelines. Core product lines include foam and air support surfaces (mattresses, overlays), seating cushions with viscoelastic foam technology, positioning devices (wedges, head supports, abduction positioners, articulated turn-and-position systems), prone positioning systems, fall prevention solutions (fall mats, bumper rails, seizure side rail pads, gait/transfer belts), operating room table pads and scope protectors, radiology immobilization products, and bed accessories. All products feature fluid-resistant, anti-bacterial covers. The company also manufactures and distributes healthcare facility furniture (casegoods, tables, traditional and modern designs) and serves as distributor for Broda Seating, Basic American/Graham-Field, and Human Care product lines. Manufacturing includes on-site product development overseen by a certified surgeon and healthcare professional advisory committee. The company holds a patented design portfolio around the Conforming Comfort® product line. Trusted by major health systems including Firelands Regional Medical Center and Fisher Titus Medical Center. Nominated 2025 Small Business of the Year.

Prytime Medical Devices, Inc. is an innovative medical device company specializing in minimally invasive solutions for hemorrhage control. The company designs, develops, and commercializes REBOA (Resuscitative Endovascular Balloon Occlusion of the Aorta) technology—a minimally invasive technique using balloon catheters to temporarily occlude large vessels in support of hemorrhage control. REBOA addresses non-compressible truncal hemorrhage, the leading cause of potentially survivable death in trauma. The company's primary product is the ER-REBOA™ PLUS Catheter, a clinical-grade device designed for emergency resuscitation. Additionally, Prytime Medical is developing the pREBOA-PRO™, described as a true partial REBOA system for enhanced hemorrhage control capabilities. Beyond trauma, clinicians report REBOA use in postpartum hemorrhage, surgical procedures, interventional radiology, and pre-hospital settings. The company maintains a US headquarters in Boerne, Texas, with sales and distribution through multiple international representatives across Europe and beyond. Contact is available via sales@prytimemedical.com and 210.340.0116. Prytime Medical positions itself as "The REBOA Company™" and emphasizes the clinical evidence supporting REBOA outcomes, including reported mortality risk reduction of 23% per year as practice evolves. The company provides patient education materials and clinical case studies demonstrating survival outcomes. All products are subject to FDA regulations and include comprehensive package inserts with indications, contraindications, precautions, and warnings.

G&C Medical Technology Inc. is a U.S.-based manufacturer and supplier of medical consumables and devices, headquartered in McLean, Virginia. With over 25 years of FDA-compliant manufacturing experience, the company provides integrated end-to-end capabilities spanning product design, precision tooling, injection molding, sterilization, and global distribution. The company operates a 93,000 sq ft manufacturing facility and maintains localized U.S. inventory for rapid fulfillment. The company's product portfolio includes operating room necessities (surgical instruments, trays), fluid management solutions (IV sets, aspiration tubes, curettes), critical care and emergency medical devices, and personal protective equipment and home care products. Recent FDA 510(k) clearance was obtained for uterine aspiration tubes and curettes with ergonomic design and precision engineering for tissue sampling and removal in hospital and clinical settings. Manufacturing and service capabilities include private label manufacturing, contract molding from mold design through sterilization and packaging, and GPO (Group Purchasing Organization) contracted e-commerce ordering. The company holds FDA registration, FDA 510(k) clearances, CE Mark, NMPA (China) approval, ISO 13485 (medical device quality management), and ISO 11135 (steam sterilization) certifications. A secondary manufacturing facility is located in Martinsville, Virginia. Distribution and fulfillment are supported through local U.S. operations and an online ordering platform for GPO members and healthcare institutions.

Nadia-Health Inc manufactures innovative respiratory care and emergency oxygen management devices designed for ICU, emergency, and hospital settings. The company's flagship product is the Atom Oxygen Diverter Flow Device, a patent-pending bi-directional oxygen flow device that simplifies oxygen delivery in high-stress clinical scenarios by consolidating multiple fittings and flowmeters into a single connection point. This streamlines workflow for respiratory therapists, nurses, and emergency personnel during critical interventions for respiratory conditions including COVID-19, pneumonia, COPD, tracheostomy cases, and code blue events. Additional product lines include the Lock-Tight Bite Block, used across neuro, CT, SICU, and MICU departments, and a disposable Temperature Probe designed for compatibility with Fisher & Paykel MR850 and HC550 humidifiers as well as RT-Series breathing circuits, Trilogy and V60 ventilators. Founded in 2023 by Darrell Harris, a respiratory therapist with 15+ years in enterprise health systems (Duke Health, Cleveland Clinic, Kaiser Permanente), the company is FDA-compliant under ISO 13485 and ISO 9001 Class I medical device management standards. The organization combines clinical expertise with commercial medical device leadership and is actively scaling sales through regional deployments targeting seven major hospital groups. Nadia-Health positions its products to address unmet workflow and safety needs in respiratory therapy, with solutions emphasizing simplification, single-patient sanitary design, and cost-effectiveness for hospital administrators and respiratory therapy teams.

OK2StandUP Inc. develops an AI-powered wearable patient monitoring system designed to predict and alert clinical staff of a patient's intention to sit up or change position within 6 seconds, supporting fall prevention protocols in hospitals, skilled nursing facilities, rehabilitation centers, and memory care communities. The system employs machine learning algorithms to detect movement patterns associated with sit-up intent, generating real-time notifications to care teams while minimizing false alarms (averaging 0.1 per bed per day). The technology is worn by patients and integrates into existing workflows without requiring cameras or one-on-one sitters, supporting evidence-based fall prevention strategies and reducing unnecessary room checks. Clinical feasibility studies across five nursing homes involving 44 high fall-risk residents over 4,500 monitoring hours reported zero falls during monitoring periods and 95% accuracy in intent detection. The system targets workflow integration for rounding, fall risk assessment, and mobility monitoring protocols. OK2StandUP serves healthcare systems, nursing homes, rehabilitation facilities, and memory care operators seeking non-invasive, AI-augmented patient safety solutions. The company is positioned for partnerships with OEM vendors seeking AI service layers and with clinical leaders implementing comprehensive fall prevention strategies.

VIPER Emergency Medical Restraints, LLC manufactures rapidly deployable soft limb restraint systems designed for managing combative and agitated patients in emergency and healthcare settings. The company's core product, VIPER (Violent Incident Prevention and Evasion Restraint), is a patent-pending universal restraint featuring adjustable CAM mechanisms and universal clips engineered for minimal training deployment. The system is manufactured in the USA, latex-free, PFAS-free, and designed to reduce physical and emotional harm to both patients and caregivers during patient securement and transport. VIPER serves multiple sectors including hospitals, EMS agencies, fire departments, law enforcement, security services, and airlines. The product is washable, reusable, one-size-fits-all, static and shock-tested, and includes complimentary training. The company was developed by personnel with over 100 years of combined emergency medical services experience, focusing on evidence-based approaches to de-escalation and safe patient handling in high-acuity behavioral health situations.

NET Recovery Corp. develops and operates the NET Device™, an FDA-cleared transcutaneous alternating current stimulator (tACS) system for the management of opioid and kratom withdrawal symptoms. The device uses mild electrical stimulation delivered through two adhesive electrodes placed behind each ear to target the brain's reward pathway, providing rapid symptom relief typically within 20–45 minutes of treatment initiation. The company operates clinical treatment centers where patients receive device application, professional monitoring, and comprehensive support through once or twice-daily check-ins over a typical 3–4 day treatment course. NET Recovery is staffed by Advanced Practice Registered Nurses (APRNs) with specialized training in the NET Device protocol and does not dispense controlled substances. Currently available in Miami, Florida, the company offers private-pay neurostimulation services supported by peer-reviewed randomized controlled trial data demonstrating effective withdrawal symptom management and reduced post-discharge substance use. The device is indicated for use in conjunction with standard symptomatic medications and other therapies under trained clinical personnel supervision.

MobileHelp is a leading provider of Personal Emergency Response Systems (PERS) and medical alert systems designed for seniors, chronic disease patients, and active adults. Founded in 2006, the company delivers 24/7 U.S.-based professional monitoring with rapid emergency response capabilities. MobileHelp offers a comprehensive range of solutions including in-home landline and cellular systems (Classic Landline, Classic Cellular), mobile wearable devices with GPS and fall detection (Solo, Micro), and bundled offerings (Home Duo, Mobile Duo) that combine home and mobile protection. All systems feature two-way voice communication, nationwide cellular and GPS technology, and AT&T connectivity options. The company emphasizes affordability with no equipment fees, no activation charges, and no long-term contracts, with pricing starting at $24.95/month. Additional services include MobileVitals telehealth platform and MobileHelp Connect for enhanced health management and care coordination, positioning the company as a comprehensive solution for independent living and emergency response.

Smart Caregiver Corporation is an industry leader with over 30 years of expertise in fall prevention and mobility monitoring solutions for high-risk individuals, residents, patients, and elderly populations. The company specializes in affordable, high-quality fall prevention monitors including bed alarms, chair alarms, floor mat sensors, motion detectors, call button systems, and door/window alarms. Their solutions are designed for both home care and facility-based settings, with customizable wireless monitoring systems that enable caregivers to afford the quantity of devices necessary to maintain resident safety and comfort. Products feature wireless alert systems, caregiver pagers, video monitoring capabilities, and centralized monitoring units for larger facilities. Proudly American-owned and operated with a focus on practical, cost-effective safety solutions.

Varian Medical Systems, a Siemens Healthineers company, specializes in cancer care solutions across the entire patient journey, including radiation oncology, adaptive therapy, interventional oncology, and image-guided treatment systems. Primary product lines include TrueBeam and Edge external beam radiotherapy systems with integrated image-guided capabilities, Ethos Therapy (an AI-powered adaptive intelligence platform for personalized cancer delivery), Halcyon platform for streamlined radiotherapy, RapidArc dynamic treatment planning, HyperSight imaging solution for enhanced real-time visualization, and IntelliBlate microwave ablation for interventional oncology. The company develops treatment planning software, dose calculation engines, and connected workflows for cancer centers. Products are FDA 510(k) cleared and serve hospital radiation oncology departments, cancer centers, and specialty clinics. Varian provides training, webinars, clinical education, and ongoing customer support. The organization conducts research in radiotherapy innovation and maintains partnerships with clinical institutions globally.

OSNovative Systems, Inc. is a privately held medical device manufacturer specializing in proprietary advanced wound management solutions for clinical and emergency medicine applications. The company designs and manufactures self-regulating, self-adaptive wound dressings with microbial barrier and reduction technologies, including negative pressure wound therapy products and emergency trauma bandages. OSNovative collaborates with leading global suppliers and ISO 13485-certified contract manufacturers to ensure compliance with the highest quality standards. The company serves both civilian healthcare and combat/emergency medicine sectors, offering innovative solutions for trauma wound care, emergency field dressings, and advanced wound healing management.

SynCardia Systems, LLC manufactures the SynCardia Total Artificial Heart (STAH), a clinically proven mechanical circulatory support device for patients with end-stage biventricular heart failure who are cardiac transplant-eligible and at imminent risk of death. The company is a wholly owned subsidiary of Picard Medical Inc. and operates from Tucson, Arizona. The STAH system comprises the implantable total artificial heart unit and two driver systems: the Companion 2 Driver System (for in-hospital and bridge-to-transplant use) and the Freedom Portable Driver System (enabling patient mobility and quality-of-life improvements). SynCardia has completed over 1,300 implants across multiple countries. The STAH is approved for sale in the U.S. and Canada and is indicated as a bridge-to-transplant therapy for patients who cannot be supported by conventional left ventricular assist devices (LVADs) alone or who require biventricular support. The company provides comprehensive clinical education, surgical technique training, patient selection guidance, and 24-hour clinical support to cardiac transplant centers and implanting surgeons. SynCardia maintains an active patient community and support program, documenting over 500 patient-years of post-implant follow-up. The device represents a critical intervention in advanced heart failure management for select patient populations.

Life Recovery Systems manufactures the ThermoSuit®, a non-invasive rapid patient cooling system for therapeutic hypothermia induction in emergency and operating room settings. The ThermoSuit achieves target body temperature of 33°C in approximately 30 minutes using rapid thin liquid convection technology—faster than traditional cooling blankets and gel pads. The system is designed for acute care applications including ischemic stroke, cardiac arrest, and other emergency conditions where controlled therapeutic hypothermia may improve patient outcomes. The company has published peer-reviewed clinical data in Frontiers of Neurology (2025) demonstrating safety and feasibility in acute ischemic stroke patients under an FDA Investigational Device Exemption. Life Recovery Systems is actively advancing clinical evidence through randomized controlled trials in partnership with the FDA. The ThermoSuit represents a significant advancement in non-invasive temperature management technology for critical care environments, addressing the clinical need for rapid and precise patient cooling in time-sensitive emergency procedures.

InfraScan, Inc. is a medical device manufacturer specializing in portable brain imaging for rapid detection of intracranial bleeding and traumatic brain injury. The company develops and commercializes the Infrascanner®, a portable screening device using Near-Infrared (NIR) spectroscopy technology to identify patients with intracranial hematomas who require immediate CT imaging and neurosurgical intervention. The Infrascanner 2500 enables non-invasive, bedside assessment of head trauma patients in emergency departments, intensive care units, military field hospitals, ambulance services, and remote locations without requiring transport to imaging facilities. Over 200 devices have been deployed to all USMC Battalion Aid Stations as part of standard trauma kits. The technology was invented by Dr. Britton Chance (University of Pennsylvania) and Dr. Claudia Robertson (Baylor College of Medicine), validated in clinical studies of 305 patients at Baylor College of Medicine. FDA-cleared and CE-marked, the Infrascanner has been studied at distinguished teaching hospitals and specialty pediatric facilities throughout the U.S. and has demonstrated clinical utility in both adult and pediatric populations internationally. The device addresses a critical gap in point-of-care neuroimaging, particularly valuable in military trauma settings, remote locations, and resource-limited environments where immediate CT access is unavailable. InfraScan holds regulatory clearances enabling use across emergency medicine, neurocritical care, military medicine, and sports medicine applications.

TechTrade LLC is an ISO 9001 and ISO 13485 compliant manufacturer of specialized medical devices and personal protective equipment. Founded in 2003, the company designs and produces innovative products for emergency response, military, and healthcare applications. Primary product lines include Ready-Heat Disposable Self-Warming Blankets—FDA-approved, portable heated blankets for treating trauma, shock, and hypothermia used by U.S. Military, EMS, rescue teams, and hospitals worldwide—and Pro-Tech 8 Structural, Wildland, and Specialty Gloves, an industry standard in fire service and rescue communities with NFPA 1971 and 1977 certification. The company leverages high-tech textile expertise and forward-thinking product design to serve emergency medical and protective equipment markets globally.

Con10gency Consulting, LLC is a professional public safety consulting firm specializing in emergency preparedness, tactical medicine, and crisis response training. The company provides comprehensive consulting services and medical products focused on preparing organizations and individuals to survive the first ten minutes of active threats and critical incidents. Services include emergency action planning, trauma training, mental preparation integration, and emergency response readiness assessment. Con10gency serves schools, universities, corporations, churches, law enforcement agencies, fire departments, EMS, and communities. The firm leverages expert consultants with decades of combined experience in law enforcement special operations, emergency medical services, fire service, and nursing to deliver practical, life-saving solutions and equipment.

Spryson (formerly Neurolign Technologies) is a world leader in neuro-functional monitoring and AI-driven eye-tracking diagnostics. The company specializes in non-invasive neurological assessment technology designed to detect and monitor neurodegenerative diseases, with particular focus on Parkinson's disease and traumatic brain injury/concussion detection. NeuroAI is their flagship platform that combines advanced eye-tracking with proprietary biomarkers and predictive analytics to enable earlier diagnosis, progression monitoring, and treatment optimization. The company has applied for FDA Breakthrough Device Status for their PD-Check technology. Spryson's approach emphasizes accessibility, bringing sophisticated neurological diagnostic capabilities to clinical institutions, research organizations, and consumer wellness applications. Their technology captures subtle neurological markers—including oculomotor responses, vestibular function, reaction time, and cognitive measures—that traditional assessment methods miss, delivering real-time objective data to clinicians for enhanced diagnostic accuracy and decision support.

Athena GTX manufactures compact, wireless patient monitoring systems designed for field and emergency medical scenarios. The company specializes in portable vital sign monitoring technology that enables real-time connectivity between patients and healthcare providers across distances. Their product suite is engineered for deployment in challenging environments including emergency departments, EMS transport, tactical medicine, battlefield triage, mass casualty incidents, search and rescue operations, and telemedicine applications. The systems are manufactured in-house in Iowa using proprietary medical and communication technology. Athena GTX serves emergency medical services, military/tactical medicine, public safety agencies, border security, and hospital emergency departments. The company positions its solutions for scenarios requiring rapid patient assessment, multi-patient monitoring, and remote clinical decision support. Applications span civilian emergency response, disaster management, infectious disease containment, and specialized rescue operations.

Firefly Vein Light LLC manufactures a portable, badge-mounted vein finder designed for pediatric and neonatal IV access. Created by two pediatric ER nurses, the device enables nursing staff to carry a clinical-grade vein illumination tool at all times, reducing delays in infant and newborn vascular access procedures. The company's 2023 multi-state clinical study (n=283 IV starts) demonstrated a 78.8% first-attempt IV success rate. The device addresses a critical gap in emergency and acute care settings where traditional hospital-based vein finders are not immediately accessible. Firefly Vein Light is nurse-owned, veteran-owned, and has achieved a Premier Inc. vein-finding equipment agreement, positioning the product for broad hospital and healthcare system distribution.

EPSIMED LLC is a Miami-based medical equipment manufacturer and distributor serving healthcare facilities across Latin America, Middle East, and globally. The company specializes in operating room equipment, patient monitoring systems, anesthesia delivery, emergency care devices, and infusion pump technology. Core product lines include surgical ceiling lights with LED technology (INFIMED brand), patient vital signs monitors (MN-150 multiparameter monitor with 15-inch touchscreen supporting adult, pediatric, and neonatal patients), syringe infusion pumps, anesthesia machines (Astra 3i model), single-use ventilators (GO2Vent), and neuromuscular transmission monitoring systems (NT-100). The MN-150 monitor offers standard parameters including ECG, SpO2, NIBP, temperature, pulse rate, and respiratory rate, with optional advanced configurations for invasive pressure, cardiac output, CO2, anesthetic gas monitoring, and cerebral state monitoring. EPSIMED maintains a presence in operating rooms, emergency departments, ICU, and neonatal care settings. The company participates in major international medical trade shows including Arab Health (Dubai), MEDICA (Düsseldorf), FIME (Miami), and EXPOMED (Mexico), indicating established distribution and regulatory compliance in multiple markets. Customer testimonials highlight strong service, product quality, competitive pricing, and technical support across Bolivia, Mexico, Peru, and Ecuador.

Verathon Inc. is a global medical device manufacturer specializing in airway management and bladder volume measurement solutions. Founded in 1984 and headquartered in Bothell, Washington, the company serves over 80 nations with a workforce of 360+ employees. As a subsidiary of Roper Technologies, Verathon is recognized for innovation in critical care and emergency medicine. The company's flagship GlideScope® video laryngoscope platform provides hyperangulated video-assisted intubation across single-use, reusable, and handheld configurations, addressing anesthesia, critical care, EMS, and pediatric airway management. The BladderScan® product line delivers noninvasive portable ultrasound systems for accurate post-void residual measurement and urinary retention management. BFlex® single-use bronchoscopes complement the total airway solution portfolio. Verathon emphasizes clinical evidence, sustainability (including bio-based plastic initiatives), and strong customer partnerships to enhance patient outcomes.

Medical Developments International (MDI) is an Australia-based global healthcare company specializing in acute pain management and respiratory products. The company is registered in over 28 countries and serves acute trauma, procedural pain, asthma, and COPD patient populations. MDI manufactures and supplies analgesia delivery systems for acute pain indications, with regulatory approvals including HPRA (Health Products Regulatory Authority) clearance for pediatric use of Penthrox. The company also develops and distributes respiratory devices for chronic disease management. MDI operates with over 80 employees and generated $33.2 million in revenue in FY24. The company maintains an active product development pipeline and engages in strategic partnerships to expand market access, including recent distributor agreements for European markets. As a publicly listed entity on the Australian Securities Exchange (ASX: MVP), MDI maintains investor relations and regulatory compliance across multiple jurisdictions. Products are marketed through local registration processes with regional distribution partners.

Midway Medical manufactures sequential compression devices (SCDs) for deep vein thrombosis (DVT) prevention. The company's primary product is the Plexus RP100, a portable, single-patient DVT prevention device delivering 50 mmHg of sequential compression to the calf. Designed for post-operative recovery in home and medical facility settings, the Plexus RP100 features extended battery life (16 hours per charge), lightweight construction (<1 pound), tubeless design, and patient compliance tracking via USB. Clinical applications include DVT onset prevention, venous flow enhancement, post-operative pain and edema reduction, and management of venous stasis ulcers, arterial ulcers, diabetic leg ulcers, chronic venous insufficiency, and stasis dermatitis. Midway Medical also manufactures Plexus DVT Sleeves—FDA-approved single-chamber sleeves compatible with multiple legacy compression pump platforms (Flowtron, VenaFlow, VasoPress, Venodyne, Cirona). Sleeves are available in multiple sizes and configurations (calf-only, calf-thigh, foot) with anatomically designed closures and breathable nylon linings. Products are manufactured to medical device standards and carry FDA clearance for DVT and venous thromboembolism prevention.

Puerto Rico Solution Supply Inc. is a private healthcare equipment distribution, sales, and service company serving the Puerto Rico market. The company operates as an exclusive distributor for several international medical equipment manufacturers, including Skytron (operating room systems), Ferno (emergency medical equipment), Mizuho (medical-surgical equipment), IG Surgical (electrosurgery and laparoscopic equipment), and Xodus Medical. Their product portfolio encompasses operating room equipment, electrosurgical systems, laparoscopic instruments, emergency medical devices, and general surgical-medical equipment, with emphasis on stainless steel construction for durability. Services include distribution across Puerto Rico, product sales, equipment delivery, and technical support. The company maintains regular business hours Monday–Friday, 8:00 AM–5:00 PM, and covers the entire Puerto Rico territory with daily, on-time delivery. While specific regulatory certifications are not detailed on the website, their partnerships with established international manufacturers suggest compliance with relevant medical device standards.

Ferno-Washington, Inc. is a 65+ year manufacturer of emergency medical services (EMS) equipment specializing in patient transport and loading systems. The company designs and manufactures ambulance cots, rescue stretchers, chair cots, pediatric and neonatal restraint systems, and integrated transport solutions for first responders, hospitals, and municipal EMS agencies. Product portfolio includes the iNX Integrated Patient Transport & Loading System, POWER X1 Ambulance Cot, PRO 28Z Chair Cot, Scoop EXL Stretcher, Pedi Mate+ Pediatric Restraint System, KangooFix Neonatal Restraint System, NeoMate Pediatric Restraint System, and professional ALS bags. Ferno serves municipal, volunteer, and hospital-based EMS operations as well as military and aviation divisions. The company provides comprehensive service and support through authorized service providers, cot care programs, and a dedicated customer service team. Manufacturing and headquarters located in Wilmington, Ohio.

Anest Iwata Sparmax is a world-class compressor and vacuum pump manufacturer serving medical, life science, and industrial markets. The company specializes in oil-less, piston, and diaphragm pump and compressor technologies. Core product lines include vacuum pumps for laboratory and medical applications (air sampling, liquid filtration, surgical/catheter aspiration, veterinary suction) and compressors for oxygen concentrators, nebulizers, disinfectant systems, and medical aspirators. The company operates through branded divisions: Cliq (medical devices) and Sparmax (consumer/airbrush). Manufacturing capabilities encompass design engineering, circuit and housing design, CNC machining of compressor components and pneumatic accessories, and field-ready system integration. All production occurs in TUV-certified Taiwan facilities compliant with ISO 9001 (quality), ISO 13485 (medical devices), and ISO 14001 (environmental management). The company provides OEM/ODM custom solutions, including modification of existing platforms and ground-up design for specific flow, pressure, and application requirements. Private labeling and packaging customization available. Notable medical applications include veterinary nebulizers (Equi-Resp), animal health products (MAI Animal Health Auri-Kleen), and neurovascular/cardiovascular suction systems. Parent company Anest Iwata brings global reach and air energy technology expertise.

Carecubes, Inc. manufactures the Carecube, an FDA 510(k)-cleared portable isolation unit designed for rapid deployment in healthcare settings to contain airborne infectious disease transmission. The Carecube converts a standard hospital bed into an isolation bed in approximately 10 minutes, exceeding CDC standards for Airborne Infection Isolation Rooms. The system isolates the pathogen rather than the patient, enabling bedside care while protecting healthcare staff and other patients. Key operational benefits include minimized PPE usage and donning/doffing time, freed-up negative pressure rooms, reduced staffing costs, and improved patient throughput. The product was initially developed with funding from the Defense Advanced Research Projects Agency (DARPA) and further supported by the Centers for Disease Control and Prevention (CDC) and the Administration for Strategic Preparedness and Response (ASPR). Development occurred in collaboration with frontline clinical teams across diverse U.S. hospital settings and in partnership with the University of Nebraska Medical Center, a recognized leader in infectious disease response. The Carecube addresses infectious disease response for known pathogens including measles, RSV, and TB, as well as emerging infectious threats. Target markets include rural healthcare facilities, major health systems, and international healthcare providers. The company positions the Carecube as a scalable, affordable solution that allows high-quality, compassionate care delivery without compromising infection control or staff safety.

JFD-PK Medical LLC manufactures innovative chest tubes and drainage catheter kits for critical care applications. The company specializes in developing disposable and reusable drainage solutions designed to improve outcomes for critically ill patients in intensive care and emergency settings. Their product portfolio focuses on thoracic drainage and catheter-based interventions used in hospitals and acute care facilities. The company is committed to innovation in critical care medicine and positions itself as a provider of quality solutions for clinicians managing patients requiring chest drainage or pleural fluid management. Based in Center Valley, Pennsylvania, JFD-PK Medical serves the U.S. healthcare market with a focus on ICU and emergency department applications. The company maintains an active web presence and engages customers through multiple digital channels.

Mason Tayler Medical Products Corp. is a Buffalo, NY-based medical device company established 20 years ago specializing in emergency, trauma, and critical care products for hospital use. The company's core product portfolio includes VeinLite®, a transillumination device designed to locate difficult-to-access veins in emergency and critical care settings; Infu-Stat™, a single-use disposable pressure infuser for rapid fluid administration; and Instant Wrap-n-Chill™, a thermal compression bandage with integrated ice pack for acute injury management. The company serves emergency departments, trauma centers, and critical care units with products focused on rapid patient assessment and intervention. Mason Tayler maintains corporate operations in Buffalo and offers domestic and international distribution. The company provides next-day shipping capability and multiple ordering channels (phone, email, fax) to support hospital procurement workflows. Product focus areas include vein access facilitation, fluid resuscitation support, and acute thermal management for trauma care.

Alleva Medical Ltd. is a global designer, developer, and contract manufacturer of medical and healthcare products established in 2005. The company specializes in negative pressure wound therapy (NPWT) systems and chest drainage/suction devices, serving hospitals, clinics, and healthcare facilities worldwide. Core product lines include the extriCARE® NPWT system (including the FDA-approved extriCARE 3000 pump, cleared for use in the United States) and the Vide® chest drainage and suction system. Alleva operates manufacturing facilities in Dongguan, China, and maintains regional offices in Hong Kong. The company holds ISO 13485 certification for medical device quality management and FDA clearance for key NPWT products. Alleva also provides contract manufacturing services for third-party medical device developers. The company participates in major international trade shows (MEDICA, CMEF, WHX) and distributes through an established sales network globally.

Armstrong Medical Industries is a US manufacturer and distributor of medical carts, emergency equipment, and training devices serving the healthcare industry for over 65 years. The company specializes in A-SMART® aluminum medical carts with wireless auto-locking technology, available in multiple configurations including narrow carts and crash carts. Product portfolio includes the Broselow Pediatric Resuscitation System (AE-4700) for emergency response, DUET suction units with battery backup, CPR training manikins with ECG lead placement simulation, emergency pediatric resuscitation kits, and personal protective equipment including disposable gloves. The company manufactures products in the USA and maintains a national salesforce providing pre-sale, delivery, and post-sale support. Armstrong Medical operates as both manufacturer and distributor, offering in-house customer service and industry-leading quality standards. The company serves acute care hospitals, emergency departments, pediatric facilities, and training centers across the United States.

ProCell Surgical Inc. manufactures the ProCell® system, the first and only automated medical device designed to recover blood from surgical sponges for intraoperative autotransfusion (IAT). The system automates the collection and processing of blood-saturated sponges during surgery, enabling reinfusion of the patient's own blood and reducing the need for allogeneic transfusions. The device is positioned as a blood conservation technology that optimizes perioperative hemostasis management. Key claimed benefits include elimination of blood splatter, reduced plasma-free hemoglobin compared to manual methods (hand-wringing), decreased LDH levels, and improved OR workflow ergonomics and safety. The ProCell system serves general surgery, orthopedic, cardiac, and trauma surgical specialties where significant intraoperative blood loss occurs. The company holds two US patents (9,199,009 and 10,039,867) and pending patents covering the automated sponge blood recovery technology. ProCell operates in the blood management and surgical hemostasis segment, targeting hospital operating rooms and surgical centers seeking to reduce transfusion rates, improve patient safety, and achieve cost savings through autologous blood recovery.

Med Labs is a U.S. manufacturer of high-quality medical electronic equipment established in 1969. The company specializes in Electronic Muscle Stimulators (EMS), Neuromuscular Stimulators, Nurse Call Switches, and Alarm systems designed specifically for patients with quadriplegia and high-level paralysis. Their product portfolio includes the E-Z Call quadriplegic universal nurse call switch, PA-1 portable nurse call alarm, Bite-or-Puff air-operated switches, and EMS-1C & 2C electronic muscular and neuromuscular stimulators. All products are manufactured in the United States and engineered to provide assistive communication and therapeutic functionality for individuals with severe mobility limitations.

MedSource Labs is a U.S.-based medical device manufacturer founded in 2002 and headquartered in Chanhassen, Minnesota. The company specializes in developing and supplying Class II medical devices for IV therapy, respiratory care, and emergency care applications. Core product offerings include safety IV catheter lines, ETCO₂ sampling cannulas, and related emergency medical solutions. All products are manufactured in the U.S. and are TAA-compliant. The company employs approximately 40-98 people and generates annual revenue of approximately $28.6 million. MedSource Labs maintains an ISO-certified Quality Management System and holds multiple FDA 510(k) clearances and patents. The company operates its proprietary EMERGE development process to support full design, validation, and customization of medical device concepts through commercialization. MedSource Labs serves emergency medical providers, hospitals, government agencies, and global healthcare organizations through a diversified supply chain and distribution network.

Oneg HaKarmel Medical Devices Ltd (OHK MED) is an Israeli medical device manufacturer founded in 1999, specializing in innovative solutions for critical care medicine, hemorrhagic shock management, and orthopedic/vascular surgical applications. The company develops and manufactures advanced physiological devices focused on blood loss management in limb surgery, severe hemorrhagic shock (SHS) resuscitation, and cardiac arrest emergency response. OHK MED's product platform combines strong regulatory compliance with strategic partnerships to address unmet clinical needs in emergency medicine and perioperative care.

Kerma Medical Products, Inc. is a healthcare medical device manufacturer and direct distributor established in 1991, based in Suffolk, Virginia. The company operates dual business divisions: a manufacturing division providing contract manufacturing, assembly, and packaging services to medical device companies, and a direct sales division serving over 4,000 healthcare locations including hospitals, acute care facilities, and durable medical equipment providers. Kerma manufactures and distributes wound care and pressure management products, patient monitoring devices, neonatal equipment, and body fluid management systems. The company is certified as a Virginia and New York state diversity supplier and holds contracts with major healthcare GPOs including HealthTrust, Premier, Vizient, and Novaplus, ensuring reliable access to quality medical products at competitive pricing with streamlined order tracking and timely delivery.

Technimount System is a Canada-based medical equipment manufacturer and supplier specializing in innovative mounting and mobility solutions for healthcare environments. The company designs and manufactures flexible, engineered mounting systems for medical devices used in emergency medical services (EMS), hospitals, air medical services, and military operations. Product lines include pre-hospital mounts for EMS vehicles and aircraft, hospital mobility systems (IV poles, carts, workstations, auxiliary arms, intra-hospital transport solutions), critical care transport solutions, and OEM/custom mounting solutions tailored to specific clinical requirements. Technimount also operates a distribution division offering third-party medical equipment. The company serves paramedics, fire departments, aeromedical services, intensive care programs, and military personnel across North America and internationally. Manufacturing capabilities include custom engineering and design services. Regulatory compliance includes certification to SAE, ISO, and FAA 14 CFR standards, with Declaration of Compliance available. The company operates dual headquarters in Quebec City, Canada and Orlando, Florida, with separate sales and technical support teams.

Precision Medical Products Inc. manufactures mobile mechanical DVT (deep vein thrombosis) prevention devices designed for acute care settings and home use. The company specializes in tubeless, cordless compression therapy solutions that enable patient mobility while preventing blood clots post-surgery. Their product portfolio includes VenaOne® for in-facility acute care, Circul8 Pro® for post-discharge home use, and Defender for government/military applications. The devices feature patented battery-operated technology with 24-hour operational capability, eliminating traditional tethered compression pumps that restrict patient movement and increase fall risk. Circul8 Pro incorporates connected technology and mobile app integration for compliance monitoring. Precision Medical's approach addresses safety concerns associated with standard DVT prevention methods, including reduced fall risk and decreased reliance on anticoagulant therapy. The company serves hundreds of acute care facilities nationwide and has earned recognition through industry awards including Medical Device & Diagnostics Industry (MDM) Digital Award and MedReps awards. Products are designed to streamline patient discharge, reduce readmission risk, lower labor costs, and improve overall patient outcomes through enhanced mobility and safety protocols.